Free Shipping
Free on every order, no minimum
Dedicated Support
Real people, quick answers
Damage Covered
Damaged on arrival, tell us within 7 days
Secure Checkout
Encrypted at every step
Free shipping on every order, no minimum. If it arrives damaged, tell us within 7 days with a photo and we replace it or refund it.
A motion sensor under cabinet light: a slim rechargeable LED bar that mounts under a cabinet, shelf or closet rail and comes on as you approach. A wall cabinet throws a shadow straight down onto the countertop you work on, and this puts the light back under it without an electrician.
One button runs everything, and the light goes off again by itself once you have moved away.
Click the button and the bar steps through 3000 K, 4000 K and 6000 K, so it can be warm over an evening countertop or crisp inside a closet. Hold the button and the brightness slides smoothly rather than jumping between steps.
Use the cable supplied in the box. A fast charging lead or a dual Type C cable will not charge it. A red light shows while it charges and turns green when it is full.
Under kitchen cabinets, inside a closet, along a shelf, in a stairwell, a hallway, a basement, a garage or a workshop.
Free Shipping
Free on every order, no minimum
Dedicated Support
Real people, quick answers
Damage Covered
Damaged on arrival, tell us within 7 days
Secure Checkout
Encrypted at every step
01
A wall cabinet throws its own shadow straight onto the worktop you chop on. A slim bar underneath it puts the light where your hands actually are, without touching the ceiling fittings.
02
Set it to sense only after dark, or to sense around the clock, and it comes on as you approach and goes off again on its own. There is a plain always on mode too, for when you want it simply left burning.
03
A click steps through 3000 K, 4000 K and 6000 K, so the same bar can be soft and warm over an evening worktop or clean and cool inside a wardrobe. Hold the button and it dims smoothly to any level.
Good to know
Four to pick from: 20 cm (7.9 in), 30 cm (11.8 in), 40 cm (15.7 in) and 50 cm (19.7 in). Measure the run underneath your cabinet or shelf and take the nearest that fits.
The button counts your presses. Once for always on, twice for motion sensing at night only, three times for motion sensing around the clock, and four times to switch it off.
About three hours to charge, then over five hours of continuous light on always on mode. Used the way most people use it, around eight times a day, a charge lasts roughly three months.
With the adhesive clip in the box. No screws, no drilling and no tools, so it goes under a cabinet, a shelf or a wardrobe rail in seconds and comes down again just as easily.
Click the button to step through 3000 K, 4000 K and 6000 K. Hold it down and the brightness slides smoothly up or down, so you can set any level rather than picking from steps.