Suction rack holding folded towels and pump bottles next to a bathroom mirror

Suction Cup Bathroom Shelf, No Drill Aluminum Wall Rack with Slotted Draining Base, 30 to 60 cm / 11.8 to 23.6 in, for Shower and Vanity

30 cm
$54.99
Skip to product information
Suction rack holding folded towels and pump bottles next to a bathroom mirror

Suction Cup Bathroom Shelf, No Drill Aluminum Wall Rack with Slotted Draining Base, 30 to 60 cm / 11.8 to 23.6 in, for Shower and Vanity

$54.99
Goes up without drilling a single hole
Slotted base drains instead of holding water
Raised rail stops bottles sliding off

Free shipping on every order, no minimum. If it arrives damaged, tell us within 7 days with a photo and we replace it or refund it.

A bathroom shelf that mounts on two press type suction cups, so it goes up in about a minute and comes down without a hole, a plug or a mark on the wall. The shelf itself is aluminum alloy with a lacquered finish, chosen because it lives in a wet room and does not rust.

The base is punched right through with drainage slots, so water runs off wet bottles and folded towels instead of collecting underneath. A 4 cm (1.6 in) rail runs around the edge to keep tall bottles in place. Four lengths are available: 30, 40, 50 and 60 cm (11.8, 15.7, 19.7 and 23.6 in).

Specifications

  • Shelf material: aluminum alloy, lacquered
  • Fittings: two press type suction cups, ABS plastic
  • Lengths: 30, 40, 50 and 60 cm (11.8, 15.7, 19.7 and 23.6 in)
  • Rail height: 4 cm (1.6 in)
  • Tiers: one
  • Load: up to about 3 kg (6.6 lb)
  • Suitable surfaces: ceramic tile, marble, glass, smooth metal, smooth painted board
  • Care: wipe dry with a cloth

Why you will like it

  • No drilling, no plugs and no adhesive residue
  • Slotted base drains rather than holding water
  • The 4 cm (1.6 in) rail keeps tall bottles from sliding off
  • Repositions onto another smooth surface whenever you want
  • Lacquered aluminum that stays bright in a wet room

Where it works

  • Inside a shower enclosure, on tile or glass
  • Above a bathtub, within easy reach of the water
  • Beside a bathroom sink or vanity mirror
  • In a rented bathroom where nothing may be drilled

Care

Wipe the shelf dry with a cloth now and then. If a cup ever loosens, clean both the cup and the wall, dry them completely and press the cup flat again to reseal it.

Bottles and towels shown are not included. Free shipping on every order.

Shipping and Returns
  • Shipping is free on every order, with no minimum.
  • We ship your order directly to the delivery address you give at checkout.
  • You receive tracking by email as soon as your order ships.
  • Larger orders may arrive in more than one parcel.
  • Returns are accepted only if your order arrives damaged. Contact us within 7 days of delivery with a photo and we will replace it or refund it.

Free Shipping

Free on every order, no minimum

Dedicated Support

Real people, quick answers

Damage Covered

Damaged on arrival, tell us within 7 days

Secure Checkout

Encrypted at every step

Suction cup bathroom shelf holding towels and bottles on tile

01

Up In Seconds, Off Without A Mark

Two press type suction cups hold it against smooth tile, glass, metal or painted board. Take it down when you move and the wall is exactly as you found it.

02

Water Runs Straight Through

The base is punched with drainage slots, so wet bottles and folded towels dry instead of sitting in a puddle. Nothing pools underneath and the shelf stays fresh between cleans.

Bathroom shelf seen from below showing the slotted draining base
Aluminium suction shelf with a raised rail and folded towels

03

Four Lengths For One Wall

Pick 30, 40, 50 or 60 cm (11.8, 15.7, 19.7 or 23.6 in) to suit the space beside the sink or inside the shower. A 4 cm (1.6 in) rail runs around the edge so tall bottles cannot work their way over the side.

Good to know

Frequently Asked Questions

Which walls will it stick to?

Smooth, flat and non porous surfaces: ceramic tile, marble, glass, smooth metal and smooth painted board. It will not hold on wallpaper, bare plaster, textured or patterned tile, or rough wood, because the cup needs a continuous surface to seal against.

How do I put it up?

Clean the wall and dry it completely, peel the film off the cups, hold the shelf level and press each cup flat to push the air out, then press the lock. Leave it 48 hours before you load it so the seal settles.

How much weight will it take?

Up to about 3 kg (6.6 lb) spread across the shelf, which covers shampoo, conditioner, body wash and a folded towel. Spread heavier bottles along the length rather than stacking them over one cup.

Can I move it once it is up?

Yes. Release the cups, wipe them and the new surface clean, then press it back on somewhere else. There are no holes or adhesive marks left behind, which makes it practical in a rented bathroom.

Will it rust in a wet bathroom?

No. The shelf is aluminum alloy with a lacquered finish, which does not rust, and the slotted base keeps standing water off it. Wipe it dry now and then and it stays bright.

You may also like